add support for autoprobing the tuners

Signed-off-by: Steve Markgraf <steve@steve-m.de>

include/tuner_e4000.h

@@ -1,120 +1,15 @@
 #ifndef __TUNER_E4000_H
 #define __TUNER_E4000_H
 
-/**
-
-@file
-
-@brief   E4000 tuner module declaration
-
-One can manipulate E4000 tuner through E4000 module.
-E4000 module is derived from tuner module.
-
-
-
-@par Example:
-@code
-
-// The example is the same as the tuner example in tuner_base.h except the listed lines.
-
-
-
-#include "tuner_e4000.h"
-
-
-...
-
-
-
-int main(void)
-{
-	TUNER_MODULE        *pTuner;
-	E4000_EXTRA_MODULE *pTunerExtra;
-
-	TUNER_MODULE          TunerModuleMemory;
-	BASE_INTERFACE_MODULE BaseInterfaceModuleMemory;
-//	I2C_BRIDGE_MODULE     I2cBridgeModuleMemory;
-
-	unsigned long BandwidthMode;
-
-
-	...
-
-
-
-	// Build E4000 tuner module.
-	BuildE4000Module(
-		&pTuner,
-		&TunerModuleMemory,
-		&BaseInterfaceModuleMemory,
-		&I2cBridgeModuleMemory,
-		0xac,								// I2C device address is 0xac in 8-bit format.
-		CRYSTAL_FREQ_16384000HZ,			// Crystal frequency is 16.384 MHz.
-		E4000_AGC_INTERNAL					// The E4000 AGC mode is internal AGC mode.
-		);
-
-
-
-
-
-	// Get E4000 tuner extra module.
-	pTunerExtra = (T2266_EXTRA_MODULE *)(pTuner->pExtra);
-
-
-
-
-
-	// ==== Initialize tuner and set its parameters =====
-
-	...
-
-	// Set E4000 bandwidth.
-	pTunerExtra->SetBandwidthMode(pTuner, E4000_BANDWIDTH_6MHZ);
-
-
-
-
-
-	// ==== Get tuner information =====
-
-	...
-
-	// Get E4000 bandwidth.
-	pTunerExtra->GetBandwidthMode(pTuner, &BandwidthMode);
-
-
-
-	// See the example for other tuner functions in tuner_base.h
-
-
-	return 0;
-}
-
-
-@endcode
-
-*/
-
-
-
-
-
-//#include "tuner_base.h"
-
-
-
-
-
-// The following context is implemented for E4000 source code.
-
-
 // Definition (implemeted for E4000)
 #define E4000_1_SUCCESS			1
 #define E4000_1_FAIL			0
 #define E4000_I2C_SUCCESS		1
 #define E4000_I2C_FAIL			0
 
-
+#define E4K_I2C_ADDR		0xc8
+#define E4K_CHECK_ADDR		0x02
+#define E4K_CHECK_VAL		0x40
 
 // Function (implemeted for E4000)
 int

include/tuner_fc0013.h

@@ -15,6 +15,10 @@ FC0013 module is derived from tuner module.
 
 **/
 
+#define FC0013_I2C_ADDR		0xc6
+#define FC0013_CHECK_ADDR	0x00
+#define FC0013_CHECK_VAL	0xa3
+
 // Definitions
 enum FC0013_TRUE_FALSE_STATUS
 {

src/rtl-sdr.c

@@ -5,7 +5,7 @@
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 2 of the License, or
- *(at your option) any later version.
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -44,7 +44,7 @@ int fc0013_init(void *dev) { return FC0013_Open(dev); }
 int fc0013_exit(void *dev) { return 0; }
 int fc0013_tune(void *dev, int freq) {
 	/* read bandwidth mode to reapply it */
-	int bw = 0;
+	unsigned int bw = 6;
 	//fc0013_GetBandwidthMode(dev, &bw); // FIXME: missing
 	return FC0013_SetFrequency(dev, freq/1000, bw & 0xff);
 }
@@ -57,10 +57,9 @@ int fc0013_set_bw(void *dev, int bw) {
 }
 
 enum rtlsdr_tuners {
-	RTLSDR_TUNER_UNDEF,
 	RTLSDR_TUNER_E4000,
 	RTLSDR_TUNER_FC0012,
-	RTLSDR_TUNER_FC0013
+	RTLSDR_TUNER_FC0013,
 };
 
 typedef struct rtlsdr_tuner {
@@ -161,6 +160,23 @@ int rtlsdr_write_array(rtlsdr_dev_t *dev, uint8_t block, uint16_t addr, uint8_t
 	return r;
 }
 
+int rtlsdr_i2c_write_reg(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t data)
+{
+	uint16_t addr = i2c_addr;
+	return rtlsdr_write_array(dev, IICB, addr, &data, 1);
+}
+
+uint8_t rtlsdr_i2c_read_reg(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t reg)
+{
+	uint16_t addr = i2c_addr;
+	uint8_t data;
+
+	rtlsdr_write_array(dev, IICB, addr, &reg, 1);
+	rtlsdr_read_array(dev, IICB, addr, &data, 1);
+
+	return data;
+}
+
 int rtlsdr_i2c_write(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t *buffer, int len)
 {
 	uint16_t addr = i2c_addr;
@@ -251,6 +267,27 @@ void rtlsdr_demod_write_reg(rtlsdr_dev_t *dev, uint8_t page, uint16_t addr, uint
 	rtlsdr_demod_read_reg(dev, 0x0a, 0x01, 1);
 }
 
+void rtlsdr_set_gpio_bit(rtlsdr_dev_t *dev, uint8_t gpio, int val)
+{
+	uint8_t r;
+
+	gpio = 1 << gpio;
+	r = rtlsdr_read_reg(dev, SYSB, GPO, 1);
+	r = val ? (r | gpio) : (r & ~gpio);
+	rtlsdr_write_reg(dev, SYSB, GPO, r, 1);
+}
+
+void rtlsdr_set_gpio_output(rtlsdr_dev_t *dev, uint8_t gpio)
+{
+	int r;
+	gpio = 1 << gpio;
+
+	r = rtlsdr_read_reg(dev, SYSB, GPD, 1);
+	rtlsdr_write_reg(dev, SYSB, GPO, r & ~gpio, 1);
+	r = rtlsdr_read_reg(dev, SYSB, GPOE, 1);
+	rtlsdr_write_reg(dev, SYSB, GPOE, r | gpio, 1);
+}
+
 void rtlsdr_set_i2c_repeater(rtlsdr_dev_t *dev, int on)
 {
 	rtlsdr_demod_write_reg(dev, 1, 0x01, on ? 0x18 : 0x10, 1);
@@ -464,6 +501,15 @@ const char *rtlsdr_get_device_name(uint32_t index)
 		return "";
 }
 
+/* TODO: put those defines in the tuner header once the drivers are added */
+#define FC0012_I2C_ADDR		0xc6
+#define FC0012_CHECK_ADDR	0x00
+#define FC0012_CHECK_VAL	0xa1
+
+#define FC2580_I2C_ADDR		0xac
+#define FC2580_CHECK_ADDR	0x01
+#define FC2580_CHECK_VAL	0x56
+
 rtlsdr_dev_t *rtlsdr_open(int index)
 {
 	int r;
@@ -473,6 +519,7 @@ rtlsdr_dev_t *rtlsdr_open(int index)
 	libusb_device *device = NULL;
 	uint32_t device_count = 0;
 	struct libusb_device_descriptor dd;
+	uint8_t reg;
 
 	dev = malloc(sizeof(rtlsdr_dev_t));
 	memset(dev, 0, sizeof(rtlsdr_dev_t));
@@ -514,10 +561,49 @@ rtlsdr_dev_t *rtlsdr_open(int index)
 
 	rtlsdr_init_baseband(dev);
 
-	// TODO: probe the tuner and set dev->tuner member to appropriate tuner object
-	// dev->tuner = &tuners[...];
+	/* Probe tuners */
+	rtlsdr_set_i2c_repeater(dev, 1);
+
+	reg = rtlsdr_i2c_read_reg(dev, E4K_I2C_ADDR, E4K_CHECK_ADDR);
+	if (reg == E4K_CHECK_VAL) {
+		printf("Found Elonics E4000 tuner\n");
+		dev->tuner = &tuners[RTLSDR_TUNER_E4000];
+		goto found;
+	}
+
+	reg = rtlsdr_i2c_read_reg(dev, FC0013_I2C_ADDR, FC0013_CHECK_ADDR);
+	if (reg == FC0013_CHECK_VAL) {
+		printf("Found Fitipower FC0013 tuner\n");
+		dev->tuner = &tuners[RTLSDR_TUNER_FC0013];
+		goto found;
+	}
 
+	reg = rtlsdr_i2c_read_reg(dev, FC2580_I2C_ADDR, FC2580_CHECK_ADDR);
+	if ((reg & 0x7f) == FC2580_CHECK_VAL) {
+		printf("Found FCI 2580 tuner\n");
+		//dev->tuner = &tuners[RTLSDR_TUNER_FC2580];
+		// TODO: set GPIO5 low
+		goto found;
+	}
+
+	/* initialise GPIOs (only needed for the FC0012 so far */
+	rtlsdr_set_gpio_output(dev, 5);
+
+	/* reset FC0012 before probing */
+	rtlsdr_set_gpio_bit(dev, 5, 1);
+	rtlsdr_set_gpio_bit(dev, 5, 0);
+
+	reg = rtlsdr_i2c_read_reg(dev, FC0012_I2C_ADDR, FC0012_CHECK_ADDR);
+	if (reg == FC0012_CHECK_VAL) {
+		printf("Found Fitipower FC0012 tuner\n");
+		dev->tuner = &tuners[RTLSDR_TUNER_FC0012];
+		goto found;
+	}
+
+found:
+	rtlsdr_set_i2c_repeater(dev, 0);
 	return dev;
+
 err:
 	return NULL;
 }

src/tuner_e4000.c

@@ -18,9 +18,7 @@
 #define I2C_BUFFER_LEN		128
 #define YES			1
 #define NO			0
-
 #define CRYSTAL_FREQ		28800000
-#define E4K_I2C_ADDR		0xc8
 
 /* glue functions to rtl-sdr code */
 int

src/tuner_fc0013.c

@@ -11,7 +11,6 @@
 #include "tuner_fc0013.h"
 
 #define CRYSTAL_FREQ		28800000
-#define FC0013_I2C_ADDR		0xc6
 
 /* glue functions to rtl-sdr code */
 int FC0013_Write(void *pTuner, unsigned char RegAddr, unsigned char Byte)