import sys
import numpy as np
import matplotlib.mlab as mlab
import matplotlib.pyplot as plt
from scipy.ndimage.filters import maximum_filter
from scipy.ndimage.morphology import (generate_binary_structure,
                                      iterate_structure, binary_erosion)
import hashlib
from operator import itemgetter

PY3 = sys.version_info >= (3, 0)

IDX_FREQ_I = 0
IDX_TIME_J = 1

######################################################################
# Sampling rate, related to the Nyquist conditions, which affects
# the range frequencies we can detect.
DEFAULT_FS = int(44100 / 2)

######################################################################
# Size of the FFT window, affects frequency granularity
DEFAULT_WINDOW_SIZE = 4096

######################################################################
# Ratio by which each sequential window overlaps the last and the
# next window. Higher overlap will allow a higher granularity of offset
# matching, but potentially more fingerprints.
DEFAULT_OVERLAP_RATIO = 0.4 #0.75 better accuracy much slower, default 0.5

######################################################################
# Degree to which a fingerprint can be paired with its neighbors --
# higher will cause more fingerprints, but potentially better accuracy.
DEFAULT_FAN_VALUE = 15 #30 twice as many fingerprints, not much accuracy

######################################################################
# Minimum amplitude in spectrogram in order to be considered a peak.
# This can be raised to reduce number of fingerprints, but can negatively
# affect accuracy.
DEFAULT_AMP_MIN = 10 #/2 useless

######################################################################
# Number of cells around an amplitude peak in the spectrogram in order
# for Dejavu to consider it a spectral peak. Higher values mean less
# fingerprints and faster matching, but can potentially affect accuracy.
PEAK_NEIGHBORHOOD_SIZE = 10 #10 to augment fingerprints 3x and improve accuracy, default 20

######################################################################
# Thresholds on how close or far fingerprints can be in time in order
# to be paired as a fingerprint. If your max is too low, higher values of
# DEFAULT_FAN_VALUE may not perform as expected.
MIN_HASH_TIME_DELTA = 0
MAX_HASH_TIME_DELTA = 200

######################################################################
# If True, will sort peaks temporally for fingerprinting;
# not sorting will cut down number of fingerprints, but potentially
# affect performance.
PEAK_SORT = True

######################################################################
# Number of bits to throw away from the front of the SHA1 hash in the
# fingerprint calculation. The more you throw away, the less storage, but
# potentially higher collisions and misclassifications when identifying songs.
FINGERPRINT_REDUCTION = 20 #1 for much less storage, leave at 20, don't change

def fingerprint(channel_samples, Fs=DEFAULT_FS,
                wsize=DEFAULT_WINDOW_SIZE,
                wratio=DEFAULT_OVERLAP_RATIO,
                fan_value=DEFAULT_FAN_VALUE,
                amp_min=DEFAULT_AMP_MIN):
    """
    FFT the channel, log transform output, find local maxima, then return
    locally sensitive hashes.
    """
    # FFT the signal and extract frequency components
    arr2D = mlab.specgram(
        channel_samples,
        NFFT=wsize,
        Fs=Fs,
        window=mlab.window_hanning,
        noverlap=int(wsize * wratio))[0]

    # apply log transform since specgram() returns linear array
    arr2D = 10 * np.log10(arr2D)
    arr2D[arr2D == -np.inf] = 0  # replace infs with zeros

    # find local maxima
    local_maxima = get_2D_peaks(arr2D, plot=False, amp_min=amp_min)

    # return hashes
    return generate_hashes(local_maxima, fan_value=fan_value)


def get_2D_peaks(arr2D, plot=False, amp_min=DEFAULT_AMP_MIN):
    # http://docs.scipy.org/doc/scipy/reference/generated/scipy.ndimage.morphology.iterate_structure.html#scipy.ndimage.morphology.iterate_structure
    struct = generate_binary_structure(2, 1)
    neighborhood = iterate_structure(struct, PEAK_NEIGHBORHOOD_SIZE)

    # find local maxima using our fliter shape
    local_max = maximum_filter(arr2D, footprint=neighborhood) == arr2D
    background = (arr2D == 0)
    eroded_background = binary_erosion(background, structure=neighborhood,
                                       border_value=1)

    # Boolean mask of arr2D with True at peaks
    detected_peaks = local_max ^ eroded_background

    # extract peaks
    amps = arr2D[detected_peaks]
    j, i = np.where(detected_peaks)

    # filter peaks
    amps = amps.flatten()
    peaks = zip(i, j, amps)
    peaks_filtered = [x for x in peaks if x[2] > amp_min]  # freq, time, amp

    # get indices for frequency and time
    frequency_idx = [x[1] for x in peaks_filtered]
    time_idx = [x[0] for x in peaks_filtered]

    if plot:
        # scatter of the peaks
        fig, ax = plt.subplots()
        ax.imshow(arr2D)
        ax.scatter(time_idx, frequency_idx)
        ax.set_xlabel('Time')
        ax.set_ylabel('Frequency')
        ax.set_title("Spectrogram")
        plt.gca().invert_yaxis()
        plt.show()

    return zip(frequency_idx, time_idx)


def generate_hashes(peaks, fan_value=DEFAULT_FAN_VALUE):
    """
    Hash list structure:
       sha1_hash[0:20]    time_offset
    [(e05b341a9b77a51fd26, 32), ... ]
    """
    if PEAK_SORT:
        if PY3:
            peaks = sorted(peaks, key=itemgetter(1))
        else:
            peaks.sort(key=itemgetter(1))

    for i in range(len(peaks)):
        for j in range(1, fan_value):
            if (i + j) < len(peaks):
                
                freq1 = peaks[i][IDX_FREQ_I]
                freq2 = peaks[i + j][IDX_FREQ_I]
                t1 = peaks[i][IDX_TIME_J]
                t2 = peaks[i + j][IDX_TIME_J]
                t_delta = t2 - t1

                if t_delta >= MIN_HASH_TIME_DELTA and t_delta <= MAX_HASH_TIME_DELTA:
                    if PY3:
                        h = hashlib.sha1(
                            ("%s|%s|%s" % (
                                str(freq1),
                                str(freq2),
                                str(t_delta)
                            )).encode()
                        )
                    else:
                        h = hashlib.sha1(
                            "%s|%s|%s" % (str(freq1), str(freq2), str(t_delta)))
                    yield (h.hexdigest()[0:FINGERPRINT_REDUCTION], t1)